Red Steel, Silver or Gold Steel mailbox flag
for brick mailboxes. $49 + FREE S&H
Mailbox Flag for Brick Mailboxes
To mount on brick or stone, MAKE SURE that you place the flag low enough to the ground and close enough to the front of the column or pillar that the mail carrier can reach if from their vehicle.
See to it that you have at least 9 inches of space above where you intend to place the flag so it can pivot freely up and down.
Using a masonry drill bit ¼” in diameter, simply drill 2 holes exactly ¾” apart, one directly above the other. Completely tap in the blue anchors. Place the stainless steel screw through the stainless washer, through the flag, through the nylon bushing (small, taper side up) and into the blue plastic anchor. Do that again with the second screw. Tighten until snug.
8-1/4"L x 2-1/2"H x 1/4" thick
3 Colors: Red (Powder-Coated Steel) Silver Aluminum or Antique Gold (Powder-Coated Steel)